357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com lvcmos (1.8v) sj-c1440 series description the sj-c1440 series of quartz crystal oscillators provide enable/disable 3-state lvcmos compatible signals for bus connected systems. supplying pin 1 of the sj-c1440 units with a logic ?1" or open enables its pin 3 output. in the disabled mode, pin 3 presents a high impedance to the load. features ? wide frequency range? 70.0mhz to 165.0mhz ? user specified tolerance available ? space-saving alternative to discrete component oscillators ? high shock resistance, to 3000g ? metal lid electrically connected to ground to reduce emi ? high q crystal actively tuned oscillator circuit ? cots/dual use ? high reliability - nel halt/hass qualified for crystal oscillator start-up conditions ? low jitter - wavecrest jitter characterization available ? 1.8volt operation ? power supply decoupling internal ? no internal pll avoids cascading pll problems ? low power consumption ? gold plated leads ? rohs compliant, lead free construction electrical connection pin connection 1 enable input 2 grd & case 3 output 4 v dd crystal clock oscillators data sheet 0210a rev. j
357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com sj-c1440 series continued lvcmos operating conditions and output characteristics electrical characteristics parameter symbol conditions min typical max frequency ----- ----- 70.0mhz ----- 165.0mhz duty cycle ----- @ v dd /2 45/55% ----- 55/45% logic 0 v ol @ 600a ----- ----- 0.2v logic 1 v oh @ 600a v dd -0.2v ----- ----- rise & fall time tr,tf 10-90% ----- ----- 3.5 ns tpz ----- ----- ----- ----- 100 ns jitter, integrated j integrated from phase noise, ----- 0.1 ps ----- 12khz to 20mhz, rms jitter, wavecrest characterized (2) ----- random period ----- 2.3ps ----- accum, pk-to-pk ----- 26ps ----- phase noise ( f) @ 10hz ----- -70 dbc/hz ----- @100hz ----- -105 dbc/hz ----- @1khz ----- -130 dbc/hz ----- @10khz ----- -145 dbc/hz ----- @100khz ----- -150 dbc/hz ----- @ >1mhz ----- -150 dbc/hz ----- enable voltage ----- ----- 1.3v ----- ----- disable voltage ----- ----- ----- ----- 0.5v frequency stability (1) df/f overall conditions including: -100ppm ----- +100ppm voltage, calibration, temp., 10 yr aging, shock, vibration general characteristics parameter symbol conditions min typical max supply voltage (3) v dd ----- 1.71v 1.8v 1.89v supply current i dd no load 0.0 ma 10ma 20ma output current i o ----- 0.0 ma ----- 25.0 ma operating temperature t a ----- 0c ----- 70c storage temperature t s ----- -55c ----- 125c power dissipation p d ----- ----- ----- 38 mw load ---- ----- ----- ----- 15pf start-up time t s ----- ----- 2 ms 10 ms environmental and mechanical characteristics mechanical shock per mil-st d-202, method 213, condition e thermal shock per mil-std- 883, method 1011, condition a vibration 0.060" double amplitude 10 hz to 55 hz, 35g?s 55hz to 2000 hz hermetic seal leak rate less than 1 x 10 -8 atm.cc/sec of helium footnotes: 1) standard frequency stability ( 20,25,50ppm & others available) 2) jitter performance is frequency dependent. please contact factory for full wavecrest characterization. 3) internal high frequency power source decoupling. test load: rev. j crystal clock oscillators sj - c 144x - freq package code tolerance/performance sj 4 j lead smd 0 100ppm 0-70c 1 50ppm 0-70c input voltage 7 25ppm 0-70c code specification 9 customer specific a 3.3v a 20ppm 0-70c b 2.5v b 50ppm -40 to +85c c 1.8 v c 100ppm -40 to +85c 5.0v creating a part number data sheet 0210a
357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com sj-c1440 series continued max reflow profile crystal clock oscillators data sheet 0210a rev. j
|
